40 enphase micro inverter wiring diagram
Complete Installation of the Enphase Q Aggregator or Junction Box A) Connect the Enphase Q Cable into the Enphase Q Aggregator or junction box. B) Use the ground lug on the Q Aggregator for module, rack, and balance of system grounding, if needed. The Q Cable uses the following wiring color code: Wire Colors Black – L1 Red – L2 8 Installing a generator myself soon But in my case I have the feed for the solar panels going through an 80 amp contactor so that they shut down at night. The Enphase micro inverters use power at night. In my case close to 4 Amps. So I installed a contactor controlled off a timer so the system shutsdown at night and restarts in the morning. Note that wiring for CP-720 twin inverters has special considerations. Examples of common configurations can be found in CP-720 Wiring Diagram Examples . Note that to land the MTC cable in a JBOX, the MALE end of any cable (MTC-1.025, MTC-1.7, MTC-2.15) can be cut and have its wires stripped back. Enphase micro i...